Thermodynamic Solar Collector

Domestic Hot Water and/or Central Heating

The Solar PST Thermodynamic System

The Solar PST system takes advantage of the latest technologies to generate hot water 24 hours a day, day or night, rain or shine.

The system works as follows.

A cooland fluid (Clea 407C) circulates inside the collector circuit at a temperature of -5 to -15 degrees Celsius. This fluid converts into a gas as it absorbs the warmer air around the solar collector.

This gas now passes to the compressor bolted onto the cylinder. Here, the gas gets compressed, increasing its temperature to 110 to 130 degrees Celsius. As this super hot gas passes through the exchanger in the cylinder, it warms the water within to around 50 to 55 degrees Celsius.

The system works 24 hours a day, guaranteeing a cylinder of hot water every morning when you wake.

PST Thermodynamic Solar Collector - Supplied & Installed

1 Solar Collector WITH Enamel Cylinder - no coil  

250 litre enamel cylinder      € 4,970.00 inc vat                   

1 Solar Collector WITH Enamel Cylinder - 1 extra coil 

250 litre enamel cylinder      € 5,370.00 inc vat                   

1 Solar Collector WITH Stainless Steel Cylinder   

280 litre stainless steel cylinder      € 5,450.00 inc vat                   

Prices include 

vat
installation and commissioning within Co Kerry area
solar pst solar collector  
solar pst pre-charged enamel or stainless steel cylinder
thermodynamic block and integral control panel   
'on roof' mounting system for slate or tile roofs
pre-insulated gas lines with R134a fluid
all plumbing fittings 

Please Note     

The above prices are for supply and installation, please call 066 711 8884 for supply only prices.

Terms  

50% deposit with order
supply only - balance prior to delivery
kbf installation - balance 7 days after commissioning

Delivery

1 week

Technical Specifications - PST Solar Collector     

type of solar panel  :   thermodynamic 

panels per system   :   1 or 2 

dimensions of panels   :  
height : 800mm
width : 2000mm
depth : 80mm

weight of panel  :  8kg

rated heat output   :  2510 watts

Technical Specifications - PST Solar Cylinder     

type of cylinders available  :   enamel, 250ltr and 300ltr  -  stainless steel, 300ltr 

dimensions of 280ltr enamel cylinder  :  
height : 1630mm 
width : 550mm 
width : 800mm with compressor attached

weight of cylinder, when empty  :  55kg

Installation Recommendations

tilt angle  :   between 0 and 90 degrees, including flat against gable wall

orientation   :   between Southeast and Southwest facing